MCOCOD DS13 Shower Door: Complete Buying Guide

The MCOCOD DS13 is a soft-close double sliding frameless shower door with two towel bars, built for wider alcove openings where both panels slide and the closing motion is gently slowed. This guide walks through what to verify before ordering: opening measurements, soft-close expectations, configuration variants, delivery, and installation planning.

Who Is the DS13 For?

The DS13 suits bathrooms where a wide opening needs two sliding panels and where quieter, softer closing is a priority. Because both panels slide on tracks, no swing clearance is required, which makes it practical for alcoves next to vanities or toilets. The two towel bars add drying space without wall-mounted hardware. If soft-close is not required, the standard double sliding DS01 may be the more economical choice; if you prefer a finger pull instead of towel bars, the DS13H variant is worth comparing.

What Soft-Close Means on the DS13

Soft-close hardware slows the panel as it nears the closed position, reducing slamming and noise. The specific catch, damper, and adjustment behavior is defined by the product design, so review the DS13 product page and manual for how the mechanism works on this model. Soft-close is a comfort feature, not a safety device: it controls the closing motion but does not prevent every impact or pinch. For a general explanation of the components and what to check when soft-close stops working, see how a soft-close shower door mechanism works.

Opening Fit and Measurements

Confirm your finished opening width and height against the DS13 product page adjustment range. Measure width at the top, middle, and bottom; measure height at both sides and the center; and check wall plumb. Soft-close models still depend on true-running tracks, so the opening must be within tolerance. For the complete measurement method, see how to measure for a shower door. Non-standard openings can be handled through the custom DS13 configurations rather than forcing a stock fit.

DS13 Variants to Compare

Variant Key difference
DS13 with two towel bars The classic configuration covered by this guide
DS13H Soft-close double sliding with one finger pull instead of towel bars
Bathtub DS13 Soft-close double sliding door built for tub-and-shower openings
Custom DS13 sizes Made-to-measure versions for non-standard widths and glass thicknesses

Each variant has its own product page with specific dimensions and options. Check the exact listing before ordering; do not assume the same ranges apply across the family.

What to Check on the Product Page

Before ordering, verify the following against the live DS13 listing:

  • Finished opening range for the exact variant.
  • Glass thickness and glass style available.
  • Hardware finish options and included components.
  • How the soft-close mechanism engages on this model.
  • Whether both panels are covered by soft-close.
  • Seals, sweeps, and towel bars included with the door.

Installation and Maintenance Planning

Like other double sliding frameless doors, the DS13 requires true-running tracks, solid wall backing at the mounting points, and careful panel alignment. The sliding shower doors guide covers sizing and configuration logic, and the sliding door installation guide explains the general installation process. For maintenance, keep the tracks clean and check the soft-close mechanism periodically; the soft-close mechanism guide includes the basic checks.

Glass and Finish Options to Compare

The DS13 is available with glass and hardware options that change how it looks and how it performs in your bathroom. Clear glass maximizes light and openness; frosted glass adds privacy; low-iron glass reduces the green tint common in standard clear glass. Finish choices such as matte black, brushed nickel, and chrome let the door match existing fixtures. Verify the available glass styles and finishes on the exact DS13 variant you are considering, because options can differ between models. For guidance on the trade-offs, see the clear versus frosted glass comparison and the low-iron versus standard clear glass article.

Delivery, Inspection, and Support

Because the DS13 includes large glass panels and a soft-close track system, confirm delivery conditions for your address before ordering. Inspect the crate and glass on arrival and photograph any damage before signing for the delivery. Keep the model, variant, and order details together, register any applicable warranty coverage, and store the installation manual where you can find it. If the soft-close behavior or any part is unclear, contact MCOCOD support with the model and photos rather than attempting adjustments that could damage the mechanism.

Ordering and Delivery Planning

  1. Measure the finished opening and confirm it fits the DS13 range.
  2. Select the size/glass option and hardware finish from the product page.
  3. Confirm shipping conditions for your address, including large-package delivery requirements.
  4. Decide between self-installation and professional installation; heavy glass and precise track alignment are the deciding factors.
  5. Ask MCOCOD to confirm fit if the opening is borderline or non-standard.

For the broader sliding door category and sizing logic, see the sliding shower doors buying guide; for soft-close benefits and buying criteria, see the soft-close shower doors guide.

Frequently Asked Questions

Is the DS13 fully frameless?

The DS13 is a frameless double sliding door with minimal visible metal around the glass, using top and bottom tracks for movement. Confirm the construction details on the product page.

Does the DS13 come with towel bars?

The standard DS13 includes two towel bars; the DS13H variant uses a finger pull instead. Verify the configuration you select on the product page.

Can the DS13 be installed on a bathtub?

Yes, MCOCOD offers a bathtub version of the DS13. Tub openings have different mounting conditions, so choose the bathtub model and confirm fit against your tub ledge measurements.

Why is my soft-close door suddenly slamming?

Dirt in the track, misaligned rollers, or a mechanism issue can change closing behavior. Start with the basic checks in the soft-close mechanism guide, and contact MCOCOD support if the problem continues.

Does soft-close work on both panels?

It depends on the model design. Confirm the behavior on the DS13 product page or with MCOCOD for the specific variant rather than assuming both panels are covered.

Ready to upgrade? View the MCOCOD DS13 soft-close double sliding shower door, or contact MCOCOD to confirm the fit for your opening.