The MCOCOD DS01 is a double sliding frameless shower door with two towel bars, designed for wider alcove openings where both panels slide on top and bottom tracks. This guide covers what to check before ordering: opening measurements, configuration details, glass and hardware options, and the steps to confirm the right fit for your bathroom.
Who Is the DS01 For?
The DS01 suits bathrooms with an alcove opening wide enough for two sliding panels, where a swing door would hit other fixtures. Because both panels slide, the door uses no floor or wall swing clearance. The integrated towel bars add convenience without separate wall hardware. If your priority is a wide opening with sliding convenience and you want a frameless look, the DS01 is a strong candidate; for a soft-close version with similar layout, compare the DS13.
What to Verify Before Ordering
A double sliding door is a system: panels, tracks, rollers, seals, and hardware must all work together. Before you order, verify these details against the live product page:
- Finished opening width and height inside the adjustment range.
- Glass thickness and glass style available on the model.
- Hardware finish options and included components.
- Roller and track system included with the door.
- Seals and sweeps included or available separately.
Opening Fit and Measurements
Confirm your finished opening width and height against the DS01 product page, because every sliding door has an adjustment range rather than one fixed size. Measure the width at the top, middle, and bottom of the finished opening, and the height at both sides and the center. Check that the walls are reasonably plumb; frameless sliding doors need tracks and panels to run true. For the full process, see how to measure for a shower door, and if your opening falls outside the standard range, consider the custom DS01 configuration instead.
Configuration and Hardware Details
- Double sliding frameless panels with two towel bars
- Top and bottom track system with rollers
- Glass thickness and size options as listed on the product page
- Hardware finish choices shown on the product page
Verify the exact glass thickness, finish availability, and included components on the live product page before ordering. Do not assume the DS01 shares specifications with other MCOCOD models; check each detail against the DS01 listing.
DS01 vs. Related Models
If you want the same double sliding layout with one finger pull instead of two towel bars, MCOCOD offers the DS01H version. If soft-close motion is important, the DS13 and DS13H families add a soft-close mechanism to the double sliding design. For tub-and-shower openings, bathtub versions of the DS01 family are available in the bathtub door collection. Compare the exact product pages for dimensions and features before deciding.
Measurement and Installation Planning
The DS01 installs like other double sliding frameless doors: tracks are mounted first, then the panels are hung and adjusted. Before installation, confirm the wall backing at the track ends and check that the opening is within tolerance. The sliding door installation guide walks through the general process, and the DS01 measurement and installation article covers model-specific steps.
Ordering Steps and Delivery Planning
- Measure the finished opening and confirm it is inside the DS01 adjustment range.
- Choose the glass size/option and hardware finish on the product page.
- Check the shipping and delivery conditions for your area, including any delivery constraints for large glass.
- Review the installation options; heavy glass and precise track alignment may make professional installation worthwhile.
- Contact MCOCOD with your measurements if anything is unclear or if the opening is non-standard.
For guidance on the sliding door category overall, see the sliding shower doors buying guide, which covers single versus double configurations and sizing.
Maintenance Expectations
A double sliding door stays smooth when the tracks are kept clean and the rollers are checked periodically. Vacuum the bottom track weekly, wipe the seals, and adjust rollers at the first sign of dragging. If rollers or seals wear out, identify the part against the model before replacing; the hardware and replacement parts guide explains what to measure and check.
Glass and Finish Options to Compare
The DS01's appearance changes with the glass and hardware you choose. Clear glass keeps the bathroom open and bright; frosted glass adds privacy; low-iron glass reduces the green tint of standard clear glass. Hardware finishes such as matte black, brushed nickel, and chrome tie the door to the rest of the room. Confirm which glass styles and finishes are available on the DS01 listing before designing around them, because not every door family offers every option. If you are weighing glass styles, the clear versus frosted comparison and the low-iron versus clear comparison cover the differences.
Delivery, Inspection, and Support
Large glass panels ship with specific handling requirements, so confirm the delivery conditions for your address before ordering. When the door arrives, inspect the crating and glass before signing; note any damage immediately and contact MCOCOD with photos. Keep the model information and order details in one place, register any applicable warranty coverage, and save the installation manual for later reference. If anything about fit or parts is unclear, contact MCOCOD support with your order and measurements rather than guessing.
Frequently Asked Questions
Does the DS01 include towel bars?
The DS01 is the double sliding frameless door with two towel bars; confirm current configuration details on the product page before ordering.
Is the DS01 a soft-close door?
No. The DS01 is a standard double sliding door. MCOCOD's soft-close double sliding models are in the DS13 family; check those product pages for soft-close availability.
Can the DS01 fit a bathtub opening?
MCOCOD offers bathtub versions of the DS01 family. Check the bathtub door collection for tub-specific models, because tub openings have different mounting requirements than alcove showers.
How do I know which size to order?
Compare your finished opening measurements to the adjustment range on the DS01 product page. If the opening is non-standard, use the custom configuration and confirm details with MCOCOD.
Can the DS01 be installed by one person?
No. The glass panels are large and heavy, and safe handling requires at least two people plus the right tools. Plan for a helper or professional installation.
Ready to order? View the MCOCOD DS01 double sliding frameless shower door, or contact MCOCOD if you need help confirming the fit.
